Component Catalog & Tech Specs

  • Straight-Line Lasers
    • L-700 Spindle Alignment Laser
    • L-702SP Machine Tool & Spindle Alignment Laser
    • L-703 Bore & Spindle Alignment Laser
    • L-703B Bore & Twin-Barrel Extruder Alignment Laser
    • L-703S Lathe/Turning-Center Spindle & Straightness Alignment Laser
    • L-705 Bore Laser
    • L-706 Bore Laser
    • L-708 Bore Alignment Laser
    • L-708LD Bore Alignment Laser
  • Continuously Sweeping Lasers
    • L-730CF Precision Leveling Laser with Coarse/Fine Adjustment Base
    • L-730 Precision Leveling Laser
    • L-730W Precision Plumb Laser
    • L-732 Precision Dual Scan® Laser
    • L-732WW Precision Dual Scan® Laser
    • L-733 Precision Triple Scan® Laser
    • L-740 Ultra-Precision Leveling Laser
    • L-740W Ultra-Precision Plumb Laser
    • L-742WW Precision Dual Scan® Laser
    • L-743 Ultra-Precision Triple Scan® Laser
  • Laser Accessories
    • A-502L Half-Bore Turbine Fixture for L-706 Laser
    • A-700 Customized Mount Stud to Fit A-705 Chuck Fixture
    • A-703T Spline-Shaft Fixture for L-703
    • A-705 Extruder-Laser Chuck Adapter for L-705
    • A-705A Adjustable Chuck-Style, Adapter for Gearbox Counter-Bore for L-705
    • A-705AL Adjustable Large, Gearbox-CounterBore Adapter for L-705
    • A-705L Large, Chuck-style, Gearbox, Counter-Bore Adapter for L-705
    • A-801 Alignment/Calibration Fixture
    • A-807 X-Y Angle/Center Calibration Fixture
    • A-808 X-Y Calibration Fixture
    • A-1700 Electronic Roll Level and Fixture
    • A-1700 Electronic Roll-Leveling Kit
    • L-102 Laser-Beam Translator
    • L-102-SA Laser-Beam Translator
    • L-103 Optical Beam Translator
    • L-106 Instrument Stand and Case
    • L-106A Screw Lift for L-106
    • L-106X Single-Axis Linear Slide for L-106
    • L-106XSA Stand-Alone Linear-Slide Stand for Scanning Lasers
    • L-106XY X-Y Translation Slide for L-106
    • L-107 Instrument Stand
    • L-111 Mounting Stand for L-700/L-705/L-706 with X-Y Angular & Center Adjustment
    • L-112 Laser Mounting Stand
    • L-111LD Mounting Stand for L-708 or L-708LD
    • L-702MB Magnetic Base Fixture For L-702SP
    • A-703SP-LM Surface-Plate Mounting Fixture for L-703S Laser
    • A-703SP-SE-A Target Straight Edge and Ruler – 18 in. (457 mm)
    • L-702RA Right-Angle Laser/Target Spindle Fixture
    • A-703SP-SE-B Target Straight Edge and Ruler – 36 in. (914 mm)
    • A-703SP-SE-C Target Straight Edge and Ruler – 54 in. (1,373 mm)
    • A-703SP-SE-D Target Straight Edge and Ruler – 72 in. (1,829 mm)
    • A-703SP-SE-CLT Corner & Midpoint, Straight-Edge Locating Tool
    • A-703SP-SE-D-EXT-A Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 72-90 in. Dims
    • A-703SP-SE-D-EXT-B Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 90-108 in. Dims
    • A-703SP-SE-D-EXT-C Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 108-126 in. Dims
    • L-705SD Customized Step-Down Adapter for L-705-L-706 Laser
    • L-730SP Split Prism Level Vial Assembly for L-730 Series™ Lasers
    • L-740SP Split Prism Level Vial Assembly for L-740 Series™ Lasers
    • M-124-LiPO Rechargeable 9V Battery Pack
    • M-124-Li-Ion Rechargeable 9V Battery Pack
  • Single-Axis Targets for Continuously Sweeping Lasers
    • A-1519-2.4XBE Single-Axis Wireless Target
    • A-1519-II-NR Single-Axis Target
    • A-1519-2.4XBE-2X 2-Axis Wireless Target for Turbine Alignment
    • A-1519-900XBE Single-Axis Wireless Target
    • A-1520-2.4XBE Single-Axis Wireless Target
    • A-1520-900XBE Single-Axis Wireless Target
    • A-1520SH-2.4XBE Type II Wireless Target
    • A-1520SH-2.4XBE-NB Type II Wireless Target
  • Multi-Axis Targets for Straight-Line Lasers
    • A-220 2-Axis Micro-Bore Self-Centering Target for Bores from .75-1.5 in.
    • A-221 2-Axis Small-Bore, Self-Centering Target for Bores from 1.18-10 in. (30-255 mm)
    • A-510 2-Axis Target 10×10 PSD for Self-Centering Bore Adapters
    • A-512 2-Axis Target 10×10 PSD for Self-Centering Bore Adapters
    • A-516-II Self-Centering, 2-Axis Target 20×20 mm with Roller-Bearing Measuring Feet
    • T-212 4-Axis Target
    • T-218 2-Axis Reference Target
    • T-218T 2-Axis Turbine Target
    • T-219 2-Axis Front-Mount Bore Target
    • T-261 Simultaneous 4-Axis Spindle Target with Rubber Cable
    • T-261A Simultaneous 4-Axis Spindle Target with Steel Cable
    • T-271 2-Axis Virtual Target for Spherical Bearings
    • T-1218 Large-Range 2-Axis Bore Target with 20×20 mm PSD
    • T-1220 2-Axis Bore Target with See-Through Capability 20×20 mm PSD
    • T-1240 2-Axis, Self-Centering, See Through, Bore Target 20×20 mm PSD
    • T-1294 3-Axis Wireless Spindle & Scan Target
    • T-1295 5-Axis Wireless Spindle & Scan Target
    • T-1297 High-Resolution 3-Axis Wireless Straightness & Scan Target
    • T-1296 Hi-Resolution 5-Axis Wireless Spindle & Scan Target
  • Target Accessories
    • A-221LTA Large-Bore, Self-Centering Target Adapter Hub for A-221 Target – 4.0-12.0 in. (102-305 mm) Bores
    • A-501A Small Bore Indicator Sweep Unit, 4″ (102mm) to 36″ (915mm) radius for A-502A/A-502L
    • A-502A Turbine Target Fixture with X-Y Adjustment
    • A-510A, A-510B, A-510C Self-Centering Bore Adapters
    • A-510LTA Large-Bore Adapter Hub – 6-18 in. (152-457 mm) Bores
    • A-510STA Medium-Bore Adapter Hub – 2.25-6 in. (57-152 mm) Bores
    • A-514A Small-Bore Target Adapter Hub + Legs for A-512/L-708 – 3.75-6.75 in. (96-172mm) bores
    • A-514A-EX Small-Bore Target Adapter Hub + Legs for A-512/L-708 – 3.75-9.75 in. (95-248 mm) Diam Bores
    • A-514B Medium-Bore Target Adapter Hub and Legs for A-512/L-708 for 6.5-17.5 in. (165-445 mm) bores
    • A-514B-EX Medium-Bore Target Adapter Hub and Legs for A-512/L-708 for 6.5 in. to 25.75 in. (165 mm to 654 mm) bores
    • A-514C Large-Bore Target Adapter Hub and Legs for A-512/L-708 for 17-40 in. (430-1000 mm) bores
    • A-514CXL Large-Bore Target Adapter Hub and Legs for A-512/L-708 for 17-50 in. (430-1250 mm) bores
    • A-514GL Large Leg-Setting Gage for A-514A, A-514B & A-514C Bore Adapters
    • A-514GS Small Leg-Setting Gage for A-514A & A-514B Bore Adapters
    • A-514GXL Extra Large Leg-Setting Gage for A-514A & A-514B Bore Adapters
    • M-516-II-CLR-ID Customized Set of 4 Measuring Legs with Roller Tips for A-516-II-XL A/B/C Bore Adapter hubs
    • A-516-II-TA-A Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from Ø3.9-9.8 in. (Ø100-250 mm)
    • A-516-II-TA-B Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from Ø9.8-19.7 in. (Ø250-500 mm)
    • A-516-II-TA-C Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from Ø19.7-29.5 in. (Ø500-750 mm)
    • A-804 0-180° Level Assembly for T-212
    • A-1297-SP High-Accuracy, Flatness-Measuring Base
    • A-1511A Wand Bore Fixture for 10″ (254 mm) to 96″ (2.44 M) Diam Bores for A-1519-900 Target
    • A-1511B Wand Bore Fixture for 10″ (254 mm) to 96″ (2.44 M) Diam Bores for A-517 Target
    • A-1519CS A/C Charging Station for up to 4 A-1519/20-II Targets
    • A-1519LS Light Shield for A-1519-900/2.4 Single -Axis Wireless
    • A-1519XLS Light Shields with Narrow-Band Filter for A-1519/1520 Targets
    • A-1520PSB High-Precision Swiveling Base for A-1519/1520
    • M-220-ID-BW Barrel-Wear Bore Adapter for A-220 2-Axis Target
    • M-220-SC-BL Self-Centering Bore Adapter for A-220 2-Axis Target
    • M-221CLS-A Customized set of Measuring Discs/Legs for A-221 for 1.18-2.00 in. (30-51 mm) Bores
    • M-221CLS-B Customized set of Measuring Discs/Legs for A-221 for 2 – 4.7 in. (51-120 mm) Bores
    • M-221CLS-II Customized set of 4 legs for A-221 Small-Bore, Self-Centering Bore Target
    • M-510 Spring Assembly for A-510P Pole
    • M-517 Extra 3-Piece Posts for A-1519/A-1520 Targets
    • M-705CLL Customized Set of 4 Legs for A-510LTA Large-Bore, Self-Centering Bore Adapter
    • M-705CLS Customized Set of 4 Legs for A-510STA Medium-Bore, Self-Centering Bore Adapter
    • M-1519 SP Surface Plate Measuring Base for A-1519/A-1520 Targets
    • M-1519B Target Stand with Mag Base and 3-Piece 12″ (305 mm) Post
    • T-219A Customized Bore Adapter for T-219 Target (customer to specify size)
    • T-219L Cable Assembly with 7 Pin Lemo Connector for T-219
    • T-225B Blade Flange for T-218 Target
    • T-225L Large-Bore 3-Leg Bore Adapter for T-218 Target
    • T-225S Adapter for T-218 Target
    • T-225T Tooling Sphere Flange for T-218 Target
    • T-225X Bore Flange for T-212 or T-215 Target
    • T-230 Target Stand
    • T-230EE “See-Through” Target Stand
    • T-231-A2L 7-Pin Amp to 14-Pin Lemo Adapter Cable for R-1307 Readouts
    • T-231A 25′ (7.5 M) Target Extension Cable
    • T-231AL 25′ Target Extension Cable with Lemo Connectors
    • T-231E 25′ (7.6 M) Flexible Steel Cable
    • T-236A Mounting Stud Adapter-T-261 to P-405
    • T-236B Mounting Stud Adapter-T-261 to T-230
    • T-237A Adapter Cable, 15-pin D-type to 8-pin CPC Connector for 2 Axis Targets to Connect to R-358 Comp. Interf
    • T-237BL R-1307 Adapter Cable, 8-pin CPC Connector to 14-pin Lemo connector for 2 Axis Targets
    • T-237C Adapter Cable, 8-pin CPC to 15-pin D-type Connector Splitter Cable
    • T-237CL Splitter Adapter Cable 15-pin D-type to 2 Lemo connectors for T-261 Target
    • T-237D Adapter Cable, 25-pin to 15-pin Connector
    • T-242 Target Straightness Measuring Base for T-1295/1296 Targets
    • T-243 Target Flatness Measuring Base for T-1295/1296 Targets
    • T-271A Target Bore Adapter for T-271
    • T-271B Bushing Adapter for T-271A for Bore Adapter
    • T-1225L Large-Bore Fixture for T-1218 Target with Legs for 6″ to 20″ Bores
    • T-1230 Target Stand for T-1218 Target with X-Y Translation Stages
    • T-1255L Large-Bore Fixture for T-1220 Target with legs for 6″ to 20″ bores
    • T-1295-AO-3 Angle-Measuring Optic 3 in. (76 mm) FL
    • T-1295-AO-6 Angle-Measuring Optic 6 in. (152 mm) FL
    • T-1500 Roll Alignment Floor Fixtures for A-1519/A-1520
    • T-1519454-Port Powered RS-485 Junction Box with A/C Adapter
    • T-1600 Non-magnetic Roll Fixture for A-1519, A-1519HR or A-1520
    • T-1601 Tight Space Roll Target Fixture-Tram Bar (requires T-1600)
  • Readouts & Computer Interfaces
    • A-910-2.4XBE USB Wireless Receivers for PC
    • A-910-900XB USB Wireless Receivers for PC
    • A-1307KS Readout Stand
    • R-358 Computer Interface
    • R-1307-2.4XBE 2-Axis Readout for Cabled and XBEE Wireless Targets
    • R-1307B-2.4XBE 2-Axis Basic Readout for Cabled and XBEE Wireless Targets
    • R-1307W-2.4XBE 2-Axis Readout for XBEE Wireless Targets
    • R-1307B 2-Axis Readouts for Cabled and Wireless Targets – Basic Model
    • R-1308 Auxiliary Readout
    • R-1357-2.4XBE Wireless PDA Readout with Read16 Software
  • Computer Hardware
    • R-342 Notebook Computer
    • R-1342 Ruggedized Laptop Computer
  • Miscellaneous Accessories
    • A-807 X-Y Angle/Center Calibration Fixture
    • A-808-212C – T-212 Target Concentricity Calibration Adapter
    • A-808-212XY – T-212 Target X-Y Calibration Stage Adapter
    • A-808-218C – T-218 Target Concentricity Calibration Adapter
    • A-808-219C – T-219 Target Concentricity Calibration Adapter
    • A-808-510C – A-510 Target Concentricity Calibration Adapter
    • A-808-510XY – A-510 Target X-Y Calibration Stage Adapter
    • A-808-512C – A-512 Target Concentricity Calibration Adapter
    • A-808-512XY – A-512 Target X-Y Calibration Stage Adapter
    • A-808-700 – L-700 Laser Mounting Hardware
    • A-808-708 – L-708 Mounting Flange
    • A-808 X-Y Calibration Fixture
    • A-808X-Y Angle-Center Calibration Fixture
    • A-808-1218C – T-1218 Target Concentricity Calibration Adapter
    • A-808-1218XY – T-1218-T1220 Target X-Y Calibration Stage
    • A-808-1220C – T-1220 Target Concentricity Calibration Adapter
    • A-808-1220XY – T-1220 Target X-Y Stage Adapter
    • A-1700 Electronic Roll Level and Fixture
    • A-1700 Electronic Roll-Leveling Kit
    • M-705 Battery Pack for L-705
    • STA4160 Battery Charger
  • Software
    • S-1387 Machine Tool Geometry Software
    • S-1388 Plane5 Software for Windows 7/8/8.1/10
    • S-1391 Spindle8 Software for Windows 7/8/8.1/10
    • S-1400 Read10-2D Software for Windows 7/8
    • S-1401 Read11 Multi-Readout Software for Win. 7/8/8.1/10 for up to 15 A-1519-2.4ZB Targets
    • S-1403 Bore9 Software for Windows
    • S-1407 MultiTurn10 Alignment Software
    • S-1408 Lathe10 Alignment Software for Lathes and Turning Centers
    • S-1409 Plane6 Surface Plate Calibration Software
    • S-1410 R-1307 Calibration Software for Cabled Targets for Win 7/8/8.1/10
  • Shipping Cases
    • A-809L Airline Laser-Only Carry-On Case for L-730 / L-740 Series Systems
    • A-809L-A Accessory Case for A-809L Airline Carry-On Case for L-730 / L-740 Series Systems
    • A-809XL2 Shipping Case w Wheels for L-106
    • A-809XL3 Heavy-Duty Shipping Case w/ Wheels for L-730/L-740 Series Lasers
    • A-809XL4 Shipping Case for L-730 / L-740 Leveling Lasers
    • A-809XL5 Extra Heavy-Duty, Wheeled Shipping Case for L-730/L-740 Series Lasers
    • A-813 Wheeled Shipping Case for L-730/740 Lasers
    • A-813A Accessories Shipping Case for L-730/740 Lasers
    • A-814 Shipping Case for L-700 / L-705 with R-1307
    • A-819 Shipping Case for L-703SP Straight Edges/Fixtures
    • A-814P Shipping Case for L-700 / L-705 with PC/Laptop
    • A-814T Shipping Case for L-700 / L-705 with Tablet
    • A-815 Shipping Case with Wheels for Turbine Systems
    • A-816 Shipping Case for L-705/L-706 Lasers, Target & Adapters
    • A-816C Shipping Case for L-708 Laser, Target & Adapter
    • A-817 Wheeled Shipping Case for L-702/L-702SP & Accessories
    • A-818 Shipping Case for L-703 Spindle & L-705 Extruder Systems
  • Discontinued Items
    • A-509 Large Capacity Shipping Case – DISCONTINUED
    • A-509A Shipping Case for L-104 Stand – DISCONTINUED
    • A-509D Pelican System Shipping Case for S-650, L-740 and L-705 Systems – DISCONTINUED
    • A-509T Turbine System Shipping Case – DISCONTINUED
    • A-510SM 2-Axis Extruder Target Customized to Bore ID – 1.5-1.99 in. bores (37-49 mm) – DISCONTINUED
    • A-511 Wand Bore Target – DISCONTINUED
    • A-517 Single-Axis Sweep Target and Stand – DISCONTINUED
    • A-516 Self-Centering, 2-Axis Target 20×20 mm with Wheeled Measuring Feet – DISCONTINUED
    • A-516CL Set of 4 Mounting Legs for A-516 Target Customized to 1 Bore ID- DISCONTINUED
    • A-516CLR Set of 4 Mounting Legs with Roller Tips for A-516 Target Customized – DISCONTINUED
    • A-516CLA Set of 4 Mounting Legs with Adjustable tip for A-516 Target with Range of +/- .25″ (6 mm) – DISCONTINUED
    • A-809XL Shipping Case w-Wheels for L-730-L-740 Lasers – DISCONTINUED
    • A-812 Shipping Case for S-680 with Nomad – DISCONTINUED
    • A-812XL Extra Capacity Shipping Case with Wheels for S-670/S-680 with Nomad – DISCONTINUED
    • A-814XL Extra Capacity Shipping Case with Wheels for L-700/L-705 with R-1307 – DISCONTINUED
    • A-814XLP Extra Capacity Shipping Case with Wheels for L-700/L-705 with PC/Laptop – DISCONTINUED
    • A-816XL Shipping Case with Wheels for L-708, A-514A, B & C Extruder System – DISCONTINUED
    • A-907 Standard Mounting Bracket Sets – DISCONTINUED
    • A-908 IR Receiver – DISCONTINUED
    • A-909 Shipping Case for L-723 Laser – DISCONTINUED
    • A-909A Laser Borescope Shipping Case – DISCONTINUED
    • A-909B Pole Case A-510 Extruder Target Insertion Pole and Extensions – DISCONTINUED
    • A-910F-900 & A-910F-2.4 USB Wireless Receivers for PC – DISCONTINUED
    • A-910-2.4ZB USB Wireless Receivers for PC – DISCONTINUED
    • A-1519-2.4 Wireless Target – DISCONTINUED
    • A-1519/A-1520 Type II Universal Wireless Targets – DISCONTINUED
    • A-1520-2.4ZB Single-Axis Wireless Target – DISCONTINUED
    • A-1519-2.4ZB Single-Axis Wireless Target – DISCONTINUED
    • A-1520SH-2.4ZB Type II Wireless Target – DISCONTINUED
    • A-1530 Height Gauge – DISCONTINUED
    • A-1532/A-1533 Extended Range Universal Scan Targets – DISCONTINUED
    • A-153063 Magnetic Base – DISCONTINUED
    • A-153065 2′ (610 mm) Pole w/pins – DISCONTINUED
    • A-153066 4′ (1.2 M) Pole w/pins – DISCONTINUED
    • A-153067 6′ (1.8M) Pole w/pins – DISCONTINUED
    • EL-905 Electronic Bubble Level – DISCONTINUED
    • L-104X Right-Angle Laser Mounting Bracket (L-720 Laser) – DISCONTINUED
    • L-110 Scanner Head for L-711 – DISCONTINUED
    • L-123 PRY Adjustment Base for L-723-722 with Levels – DISCONTINUED
    • L-719 Leveling Laser – DISCONTINUED
    • L-720 Machine Tool Laser – DISCONTINUED
    • L-720M Stud Mounted Machine Tool Laser – DISCONTINUED
    • L-722 Dual Scan Laser – DISCONTINUED
    • L-723 Triple Scan Laser – DISCONTINUED
    • L-741 Ultra-Precision Leveling and Plumb Laser – DISCONTINUED
    • L-731 Precision Leveling Laser with Plumb Beam – DISCONTINUED
    • LV10-99 AC Adapter – DISCONTINUED
    • P-403 Remote Optical Square for Measuring Bore Squareness – DISCONTINUED
    • P-405 Auto-Sweeping Remote Optical Square – DISCONTINUED
    • R-307 2-Axis LCD and R-307V Large-Number LED Readouts – DISCONTINUED
    • R-308 Single-Axis LCD and R-308V Single Axis Large-Number Readout – DISCONTINUED
    • R-359 Computer Interface – DISCONTINUED
    • R-1309 Cassiopeia PDA Readout with IR Receiver and Read9 Software Detail – DISCONTINUED
    • R-1307 2-Axis Readouts for Cabled and Wireless Targets
    • R-1310 Readout with 900 MHz or 2.4 GHz Radio Communication – DISCONTINUED
    • R-1355-2.4ZB Wireless PDA Readout with Read9 Software – DISCONTINUED
    • R-1356-2.4ZB Wireless PDA Readout with Read15 Software – DISCONTINUED
    • R-1357-2.4ZB Wireless PDA Readout with Read16 Software – DISCONTINUED
    • R-1357-900XB Wireless PDA Readout with Read16 Software – DISCONTINUED
    • S-640 4-AXIS Coupling Alignment System – DISCONTINUED
    • S-650 Wireless 5-Axis Shaft Alignment System – DISCONTINUED
    • S-1380 READ8 Software – DISCONTINUED
    • S-1404 Lathe9 Software for Lathes and Turning Machines – DISCONTINUED
    • T-251 Scanner Target Pre-Amplifier – DISCONTINUED
    • 11107 Adapter Plate – DISCONTINUED