Laser beam alignment fixture used with the L-700, L-702, L-702SP for aligning the laser beam to the .500 in. (12.7 mm) mounting stud prior to doing an alignment. This essentially puts the laser’s angular and center (if any) adjustments in the center of their range.
Can also be used to check the centering error of the target to its mounting stud.
- Multi-turn machines
- Turning centers
- Quick setup to re-align laser to mounting stud
- Rugged design
- Useful for brush-up training before actual work is performed.
LxHxW: 13.5 x 5.75 x 2 in. (343 x 146 x 51 mm)
16 oz (454 g)
Distance between mounting surfaces
11.5 in (292 mm)
Mounting Hole Diameter
0.4995 in (12.687 mm)
- Call Us: +1-203-730-4600
- Email: firstname.lastname@example.org
- Website: www.hamarlaser.com