T-218T 2-Axis Turbine Target

A 2-axis bore target with a 10×10 mm PDS, used with our L-706 Steam Turbine Bore Alignment kit.  Comes with a flange to interface with the A-502A Turbine Half-Bore Fixture.  Works with the R-1307 2-Axis Readouts giving it a .0001 in. (0.001 mm) resolution.

  • Steam Turbines
  • Gas Turbines
  • Used with Hamar Laser’s Bore Alignment Lasers, such as the L-705, L-706 and L-708.
  • 2-Axis 10×10 mm PSD with .0001 in. (0.001 mm) resolution when used with the R-1307 Readout.
  • Compatible with the R-1307 series of readouts (the R-1307C, R-1307-900, R-1307-2.4 and A-910-
  • Prism flip mechanism that allows the laser to pass through the target without having to remove it.
  • 2.2495 in. (57.137 mm) OD, hardened stainless steel housing.
  • Compatible with the T-230 Target Stand.
Mounting Dimension:
2.2490 in. - 2.2495 in (57.125 mm to 57.137 mm) outer diameter
440C Stainless Steel, RC54 hardness
.0001 in. (0.0005 mm) with R-1307 Readouts
±1.5 mm: error is < 2%
± 3 mm: error is < 5%
± .100 in. (2.5 mm) in both axes
PSD Concentricity to Housing:
Within .0005 in. (0.013 mm) TIR
Cord Dimensions:
Target to connector: 10 ft. (3.05 m)
14-Pin Stainless Steel Lemo

Print Page