A-514B-EX Medium-Bore Target Adapter Hub and Legs for A-512/L-708 for 6.5″ to 25.75″ (165 mm to 654 mm) bores (copy)

Description

  • Fully adjustable, self-centering bore adapter for the L-708 Laser and A-512 2-Axis Bore Target to self-center the laser and target into a bore for bores from 6.50 – 25.75 in. (165 – 654 mm) in diameter. The A-514B-EX comes with the A-514GL Leg-Setting Gage to set the legs to the proper nominal bore diameter. Centering accuracy is ~ .0005 in. (0.012 mm).
  • Does not require a 0 + 180 degree measurements like conventional bore targets or a sweep unit like some competing bore alignment lasers. Just insert the target + adapter into the bore and in 5 seconds, you have the measurement.

Applications

  • Compressor bores
  • Cylinders
  • Engine block bores
  • Extruder barrels
  • Locomotive engine bores

Features

  • Designed to self-center the A-512 2-Axis Bore Target and L-708 Laser.
  • Fully adjustable for bore diameters from 6.50 – 25.75 in. (165 – 654 mm) using A-514GL Leg-Setting Gage and included 12 in. (304 mm) digital calipers.
  • Takes just 5 seconds to insert into a bore and get a concentricity or straightness measurement.
  • Does not require 2 measurements, 0 degrees and 180 degrees, like conventional bore spider fixtures.
  • Does not require sweeping the bore like conventional or laser bore spider sweep fixtures.
  • High accuracy.  With care accuracies of .0003 in. (0.0075 mm) in 10 feet (3 m) can be achieved.

Specifications

Supported Laser/Targets:
L-708, L-708LD and A-512 2-Axis Bore Target
Bore Diameter Range:
6.50 - 25.75 in. (165-654mm) bores diameters. A-514GS/A-514GL Leg-Setting Gage sets the legs to nominal bore ID using supplied calipers.
2.60 in. (60.04 mm) Measuring Legs:
For Bore ID's: 6.500-9.250 in. (165.1-234.95 mm)
3.97 in. (100.84 mm) Measuring Legs:
For Bore ID's: 9.250-12.000 in. (234.95-304.8 mm)
5.35 in. (135.89 mm) Measuring Legs:
For Bore ID's: 12.000-14.750 in. (304.8-374.65 mm)
6.73 in. (170.82 mm) Measuring Legs:
For Bore ID's: 14.750-17.500 in. (374.65-444.5 mm)
8.10 in. (205.74 mm) Measuring Legs:
For Bore ID's: 17.500-20.250 in. (444.50-514.35 mm)
9.48 in. (240.67 mm) Measuring Legs:
For Bore ID's: 20.250-23.000 in. (514.35-584.20 mm)
10.85 in. (275.59 mm) Measuring Legs:
For Bore ID's: 23.000-25.750 in. (584.20-654.05 mm)
Material:
Aluminum and stainless steel

Drawings