T-230 Target Stand

T-230 Target Stand


T-230 2-Axis Target Stand comes with a 2-axis, micrometer-controlled adjustment stage, post and magnetic base and is used to hold reference targets during laser spindle axis setup. Supports the following:

  • T-218 2-Axis, See-Through Target
  • T-212 4-Axis Target (requires T-236B Mounting Stud Adapter)
  • T-219 2-Axis, Front-Mount Bore Target
  • T-261A 4-Axis Simultaneous Spindle Target (requires T-236B Mounting Stud Adapter).

Can also be used for span error calibration for R-1307 if calibrated micrometers are ordered.


  • Spindle-to-Bore Laser Setup
  • Alignment of laser to headstock rotation axis
  • Marine Gearbox Spindle Axis Setup
  • Machine Tool Alignment with T-212
  • Reference target holder for heat exchanger applications


  • X-Y translation stage with Starret micrometers
  • 12 in.(308 mm) of vertical adjustment
  • Micrometers have +/- 0.25 in. (6 mm) adjustment range
  • .0001 in. (0.005 mm) adjustment resolution
  • Supports: T-218, T-219, T-212, T-261A targets
  • 70 lb (32 kg) magnetic base


Mounting Information
Switch-lock magnetic base 70 lb. (32 kg) holding force
Vertical Adjustment
8 in. (203.2 mm) vertical post
Mounting Surface for Targets
.500 (12.75 mm) mounting surface ID 2.250 in. (57.2 mm) mounting surface ID
4.75 lbs (2.14 kg)
Target Holder: Aluminum Post: 440C stainless, RC54-58 hardness
Micrometer Range:
+/- 0.25 in. (6 mm) for X (vertical) and Y (horizontal) stages