READOUTS

R-307 2-Axis LCD Readout
R-308 Single-Axis Digital Readout
R-1309 Cassiopeia PDA Readout with IR Receiver
and Read9 Software


 
 

R-307 2-Axis LCD and R-307V Large-Number LED Readouts


DESCRIPTION

The R-307 is a compact, digital LCD readout that displays vertical and horizontal center or angle readings in one of three user-selectable resolutions: .001", .0001" or .01 mm. The numeric value represents the position of the laser plane relative to the target centerline. A positive reading indicates that target is above the laser plane, while a negative reading indicates that the target is below the laser plane. The R-307V offers the same features but with a large-number display that can be seen from 50 feet (15 M) away.

The unit has settings for two levels of response time. The FAST setting shows the actual target reading without electronic dampening. The SLOW setting electronically dampens or averages the readings to reduce fluctuations caused by atmospheric turbulence, vibration, or other disturbances. The readout is powered by a rechargeable 9-volt battery or by an AC charger/adapter, making the unit portable and easy to use in any environment for up to 8 hours. An LED on the side indicates when the battery is low. Another LED on the face plate blinks to indicate that the laser beam is on target.

APPLICATIONS

  • For use with all straight-line lasers (L-700, L-701, L-705, L-720, L-720M)
  • Compatible with the following targets: T-212,
    T-218, T-261A (requires adapter cable), A-510, and A-517.
  • Can also be used with the T-251 Scanner Preamp for continuously rotating lasers.

FEATURES

  • Easy to read LCD panel meters for 2 axes.
  • Three user-selectable display resolutions (.001", .0001", or .01 mm).
  • FAST response setting provides actual direct readings of the target.
  • SLOW response setting adds electronic damping or averaging to the reading to reduce fluctuations caused by atmospheric turbulence or vibration.
  • Automatic intensity control and continuous cell construction keep the target calibrated regardless of changes in laser beam intensity or spot size.
  • Powered by rechargeable 9-volt battery or AC charger/adapter.
  • On-target LED.
  • Low-battery indicator.
  • Available with large number LED display (R-307V).

SPECIFICATIONS

Size: 3 1/2" x 3 1/2" x 1 5/8"
Weight: 9 oz.
Controls: Resolution switch, .001"/.0001"/.01 mm
SLOW or FAST response switch.
Indicators: 2 LCD panel meters
Power: Internal 9V battery, rechargeable by external AC charger/adapter
Operation Times: Approximately 8 hours with full charge (approximately 4 hours when used with the Model T-251 Scanner Preamp)

Battery Charging Time:

Approximately 14 hours (will operate off the recharging unit at any time)
Compatibility: Target Models: T-212, T-218, T-261A (requires adapter cable), A- 510 and A-511

DIMENSIONS





 

R-308 Single-Axis LCD and R-308V Single Axis Large-Number LED Readouts

DESCRIPTION
The Model R-308 is a portable, single-axis, digital readout, used with all Hamar Laser continuously rotating laser systems. It displays the misalignment of the measured surface from the laser plane on an easy-to-read LCD meter. The numeric value represents the position of the laser plane relative to the target centerline. A positive reading indicates that target is above the laser plane, while a negative reading indicates that the target is below the laser plane. The R-308V offers the same features but with a large-number display that can be seen from 50 feet (15 M) away.

The user can select resolutions from .001", .0001", or .01 mm. The unit is powered by an internal, rechargeable 9V battery or by an external AC charger/adapter and will run approximately 8 hours on a charge. FAST response provides direct readings of the target. SLOW response adds electronic damping or averaging to the reading to reduce fluctuations caused by atmospheric turbulence.

APPLICATIONS

  • For use with all continuously rotating lasers (L-719, L-720, L-720M, L-722 and L-723).
  • Compatible with the A-517 target.

FEATURES

  • Easy to read LCD panel meters for 1 axis.
  • Three user-selectable display resolutions (.001", .0001", or .01 mm).
  • FAST response setting provides actual direct readings of the target.
  • SLOW response setting adds electronic damping or averaging to the reading to reduce fluctuations caused by atmospheric turbulence or vibration.
  • Automatic intensity control and continuous cell construction keep the target calibrated regardless of changes in laser beam intensity or spot size.
  • Powered by rechargeable 9-volt battery or AC charger/adapter.
  • On-target LED.
  • Low battery indicator.
  • Available with large number LED displays (R-308V).

SPECIFICATIONS

Size: 3 1/2" x 3 1/2" x 1 5/8"
Weight: 9 oz.
Controls: Resolution switch, .001"/.0001"/.01 mm
SLOW or FAST response switch.
Indicators: LCD panel meter
Power: Internal 9V battery, rechargeable by external AC charger/adaptor
Operation Times: Approximately 8 hours with full charge

Battery Charging Time:

Approximately 14 hours (will operate off the recharging unit at any time)
Compatibility: A-517 target

DIMENSIONS



 

R-1309 Cassiopeia PDA Readout with IR Receiver and Read9 Software

View Datasheet [PDF, 820K]

DESCRIPTION
The R-1309 is an innovative readout that uses Hamar Laser's Read9 alignment software on a Cassiopeia handheld computer or personal digital assistant (PDA). The R-1309 can display up to 4 A-1519/20 Single-Axis Wireless Targets using a wireless infrared receiver, eliminating messy cabling and multiple readouts. It allows a user to perform many alignment functions with the convenience and portability of a handheld computer. The display screen shows a measurement value for each of the connected targets (letters A through D refer to the corresponding labels on the targets). Each numeric value represents the position of the laser plane relative to the target centerline. A positive reading indicates that target is above the laser plane, while a negative reading indicates that the target is below the laser plane.

The R-1309 can toggle between Absolute (indicating exactly where the laser plane hits the target cell) or Relative modes. In Relative mode, the readout shows the measurement relative to the user-determined zero point. It also shows a display of the difference between two target measurements, a very useful feature for "buck-in," roll alignment and angular measurements, and a graphical display of each target's position relative to the laser plane.

FEATURES

  • Handheld computer-driven readout with wireless IR receiver and large, color graphics.
  • Displays up to 4 wireless targets simultaneously.
  • Displays actual dimensions when targets are in Height Gage Mode.
  • Electronic zeroing of target readings.
  • Relative mode subtracts one target reading from another, simplifying set up and roll alignment.
  • User-selectable measurement averaging for tough atmospheric conditions.
  • Graphical display of laser plane and target locations.
  • Saves readings to a file in spreadsheet-compatible format. File can be transfered to a desktop PC for analysis.
  • Rechargeable battery that runs up to 8 hours on a charge.
  • Replaceable lithium-ion back up battery.

SPECIFICATIONS

Size: 7.25" L x 3.4" W x 1.375" D
Weight: 1 lb.
Controls: Resolution switch, .001"/.0001"/.000015"/.001 mm
User-selectable measurement averaging
Absolute and Relative Modes
Indicators: LCD Computer Screen
Power: Internal 3.7V (1400 mAh) battery, rechargeable by external AC charger/adaptor
Operation Times: Approximately 8 hours with full charge

Battery Charging Time:

Approximately 4 hours (will operate off the recharging unit at any time)
Compatibility: A-1519/A-1519HR/1520 Single-Axis Wireless Target













  R-1307 Digital Readouts

View Datasheet [PDF]

DESCRIPTION
Available in the different models:

R-1307C: Reads all Hamar Laser Dual Axis Cabled Targets
(e.g. A-517, T-214,T-218, etx). It is a functional replacement
for the R-307 Readout.

R-1307W: Wireless Readout for the A-1519 and A-1520 Wireless
Unitargets. Reads up to two Unitargets in Single Axis Scanning
Mode or one Unitarget in Dual Axis Fixed Beam mode.

R-1307: Universal Version with all the capabilities of both the
R-1307C and the R-1307W in one unit.

FEATURES

  • Displays Readings for up to 2 Single Axis Wireless Targets simultaneously.
    or 1 Wireless Target in Dual Axis mode (Fixed Beam)
  • Electronic zeroing of target readings.
  • User-selectable measurement averaging for tough atmospheric conditions.
  • LED numerical display with up to 4 decimal places of resolution.
  • Rechargeable battery that runs up to 8 hours on a charge.

SPECIFICATIONS

  R-1308 Auxiliary Readout


View Datasheet [PDF]

DESCRIPTION

The R-1308 is an accessory for the A-1519 and the A-1520 Type II Unitargets.
It connects to the Unitarget AUX port. Designed to mount on the standard
5/8" diameter target extension rods.

FEATURES

  • Electronic zeroing of target reading
  • User-selectable Measurement Units and Display Resolution
  • LED numerical display with up to 4 decimal places of resolution.

SPECIFICATIONS