Hamar Laser is the world leader in laser alignment technology. Behind that technology are employees dedicated to providing the best laser alignment equipment, training, and alignment and calibration services to our customers. Our service and training department is staffed with industry experts who have more experience than anyone else in the industry. These experts can apply our lasers to almost any alignment application.

With nearly 20 years experience, our laser training staff offers the most comprehensive laser alignment training available today. Each course covers the basics, such as setup, calibration, laser theory and troubleshooting. In addition, the instructor will customize each course to the specific needs of the students, providing valuable timesaving short- cuts and hands-on training for almost any application.

Our National Training Center offers certification classes in the following areas of laser alignment and software:

Spindle:
Level 1 - Basic
Level 2 - Advanced
Level 3 - Masters
 Refresher Training

Geometry:
Level 1 - Flat and Level
Level 2 - Bore Alignment and Straightness plus Level 1
Level 3 - Squareness plus Levels 1 and 2
Refresher Training

Bore
Coupling
Extruder
Laser Alignment Overview
Laser System Calibration
Machine Build
Roll Alignment
Software (HLI software training)
Turbine

At the conclusion of each class, students will receive a certificate of completion or competence. A certificate of competence will be awarded if the student passes all certification testing.


Spindle Alignment Certification, Level 1 - Basic

PREREQUISITE: 0 to 100 Hours of Laser Alignment Experience Using the Hamar Laser L-700 Spindle Alignment System.
CLASS LENGTH: 24 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide trainees with information to correctly install and use the software and L-700 Spindle Alignment System, and to perform the four steps of alignment.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on training in the following areas:

  • Connecting Equipment
  • Alignment Procedures
  • Theory of Alignment
    •
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Correctly connect the target, interface, and computer to each other.
  2. Install and execute Read8 and Spindle8.
  3. Install a laser and a target in a machine.
  4. Measure a machine using Read8 or Spindle8 Software.
COST:

Level 1: $1,250 per person
In-Plant Training*: $5,400 plus expenses

*In-Plant Training prices include 3 people per course. Cost for additional personnel is $900 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.


Spindle Alignment Certification, Level 2 - Advanced

PREREQUISITE: 100 to 200 Hours of Laser Alignment Experience Using the Hamar Laser L-700 Spindle Alignment System.
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: This course will provide the advanced user with information that will enable him to use the equipment to its fullest potential.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on training in the following areas:

  • Advanced Spindle Alignment Concepts
  • Justification for Alignment
  • Pre-alignment Considerations
PERFORMANCE OBJECTIVES:

Trainee will be able to:

  1. Diagnose and pin point problem areas associated with Spindle Alignment.
  2. Sketch and describe what the master and the adapter should be able to do.
  3. Qualify a laser using Read8 or Spindle8 Software.
  4. Calibrate targets.
COST:

Level 2: $1,050 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.


Spindle Alignment Certification, Level 3 - Master

PREREQUISITE: 200 or More Hours of Laser Alignment Experience Using the Hamar Laser L-700 Spindle Alignment System.
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: This course will provide the student with information that will enhance the knowledge and practical uses of the Spindle Laser System.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on training in the following areas:

  • Build and Design of Masters and Adapters
  • Using the Spindle Laser and the Spindle8 Program as a preventative maintenance tool.
  • Critical aspects of a laser in a moving unit versus a laser in a stationary unit.
  • Use of the Spindle Laser for alignments other than Spindle Alignment.
PERFORMANCE OBJECTIVES:

Trainee will be able to:

  1. Implement the L-700 System into a preventative maintenance program.
  2. Recognize the advantages or disadvantages of a laser in a moving unit or in a stationary unit.
  3. Design and engineer masters and adapters for a given alignment.
  4. Use the L-700 Spindle System as a Bore Alignment, Straightness, and Squareness Tool.
COST:

Level 3: $1,050 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.


Geometric Alignment Certification, Level 1 - Flat and Level

PREREQUISITE: None
CLASS LENGTH: 8 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide the trainee with information to correctly set-up and perform a Three Point Buck-In, calibrate level vials, and record measurements relative to flatness or level.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on application in the following areas:

  • Terminology
  • Laser and Target Set-Up
  • Calibration of Level Vials
  • Creating a Flat Plane
PERFORMANCE OBJECTIVES:

Trainee will be able to:

  1. Identify and describe equipment and functions.
  2. Correctly set-up and perform a Three Point Buck-In.
  3. Correctly calibrate level vials.
COST:

Level 1: $850 per person
In-Plant Training*: $1,800 plus expenses


Call 1-800-540-7754 for more information on this course.


 

Geometric Alignment Certification, Level 2 - Flat, Level, Bore Alignment and Straightness

PREREQUISITE: None
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: Provides information to correctly set-up and perform a Two Point Buck-In. Also covers Target Centering Error Readings and Bore Centering Error Readings relative to the laser beam.
COURSE DESCRIPTION:

This Course will provide theory explanation and hands on application in the following areas:

  • Terminology
  • Laser and Target Set-Up
  • Creating a Flat Plane and a Straight Line Between Two Points
PERFORMANCE OBJECTIVES:

Trainee will be able to:

  1. Identify and describe equipment and functions.
  2. Correctly set-up and perform a Two Point Buck-In and a Three Point Buck-In.
  3. Measure an edge or a straight line with a scanning plane or a straight line beam.
  4. Correctly calibrate level vials.
COST:

Level 2: $1,050 per person
In-Plant Training*: $3,600 plus expenses

*In-Plant Training prices include 3 people per course. Cost for additional personnel is $600 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

Geometric Alignment Certification, Level 3 - Flat, Level, Bore Alignment, Straightness, and Squareness

PREREQUISITE: None
CLASS LENGTH: 24 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide the student with information to correctly set-up and create a square plane using the P-405 or the L-720 Series Lasers.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on application in the following areas:

  • Terminology
  • Laser and Target Set-Up Using T-212, T-218, T-261, A-517 Targets
  • Projecting a Square Plane or Straight Line Beam
    • Creating a Scanning Square Plane with L-711 and P-405 and the L-720 Series Lasers
  • Creating a Scanning Square Plane with L-711 and P-405 and the L-720 Series Lasers
  • Buck-In Procedure Using P-405
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Identify and describe equipment and functions.
  2. Correctly set-up and create a square plane.
  3. Correctly set-up and use reference targets as datum points.
COST:

Level 3: $1,250 per person
In-Plant Training*: $5,400 plus expenses

*In-Plant Training prices include 3 people per course. Cost for additional personnel is $900 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Coupling Alignment

PREREQUISITE: None
CLASS LENGTH: 8 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: Provides the necessary information to operate the laser equipment and software.
COURSE DESCRIPTION:

This course will enable the student to properly set-up and measure a mechanical Coupling using the Hamar Laser Coupling Alignment System.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Correctly assemble and install the brackets, the target, and the laser on the shafts.
  2. Correctly connect a target, an interface, and a computer.
  3. Install, set-up, and operate the Couple4 Software.
  4. Measure shaft misalignment (coupled or uncoupled) and adjust accordingly
COST:

$850 per person
In-Plant Training*: $1,800 plus expenses

In-Plant Training prices include 3 people per course. Cost for additional personnel is $300 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Software (See Course Options)

PREREQUISITE: None
CLASS LENGTH: 4 or 8 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide the trainee with information to correctly install and execute the applicable software.
COURSE DESCRIPTION:

These courses will provide explanation of the software's capabilities and applications per the users' environment.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Install software.
  2. Load and setup the program(s).
  3. Perform steps to record and save data.
  4. Use software for intended application
SOFTWARE COURSES OPTIONS:
  • Basic - Read7 and Target Utility
  • Read8
  • Plane5
  • Bore7
  • Spindle8
  • Couple4
  • Caster
  • Machine Tool Geometry
COST:

Any One Software Course - 4 hours: $450 per person
Any One Software Course - 8 hours: $850 per person
In-Plant Training*: $1,800 plus expenses

*In-Plant Training prices include 3 people per course. Cost for additional personnel is $300 per person with maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Extruder Alignment Certification

PREREQUISITE: None
CLASS LENGTH: 8 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide the necessary information to operate the laser equipment and software.
COURSE DESCRIPTION:

This course will enable the student to properly set-up and measure using a L-705 Laser, R-307 Readout, A-510 or T-218 Target and use the software as needed.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Install and align the laser to the axis of rotation or the required reference line.
  2. Setup the target and the readout to manually take data and to use the proper formulas to calculate the alignment.
  3. Install, setup, and take data using Read8 to plot straightness.
COST:

$850 per person
In-Plant Training*: $1,800 plus expenses

In-Plant Training prices include 3 people per course. Cost for additional personnel is $300 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Bore Alignment Certification

PREREQUISITE: None
CLASS LENGTH: 8 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: It will provide the necessary information to operate the laser equipment and software.
COURSE DESCRIPTION:

This course will enable the student to properly setup and measure using a laser, R-307 Readout, A-510 or T-218 Target and use the software as needed.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Install and align the laser to the required reference centerline or the axis of rotation.
  2. Setup the target and the readout to manually take data and to use the proper formulas to calculate the alignment.
  3. Install, setup, and take data using Bore6 to calculate the alignment.
COST:

$850 per person
In-Plant Training*: $1,800 plus expenses

In-Plant Training prices include 3 people per course. Cost for additional personnel is $300 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Turbine Alignment Certification

PREREQUISITE: None
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: This course will provide the attendee with information, which will enhance the knowledge of turbine laser alignment.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on application in the following areas:

  • Mounting and centering of the A-501 Target Holders in the turbine component
  • Aligning the laser to the reference targets
  • Measuring the alignment of internal turbine components using an A-501 Target Holder and the A-511 Wand Bore Target
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Properly mount the A-501 Target Fixture to a turbine component.
  2. Align the A-501 Target Fixture to the center of the component using a dial indicator bore sweep unit.
  3. Align the laser to pass through the center of two (2) reference targets with and without offsets.
  4. Measure the alignment of the internal components of a turbine using an A-501 Target Holder with a T-218T Target and an A-511 Wand Bore Target.
COST:

Turbine Alignment: $1,050 per person
In-Plant Training: $3,600 plus expenses

I*In-Plant Training prices include 3 people per course. Cost for additional personnel is $600 per person with a maximum course size of 6 people. These prices are based on regular training hours.


Call 1-800-540-7754 for more information on this course.

 

Machine Build/Foundation

PREREQUISITE: None
CLASS LENGTH: 40 Hours
CLASS SIZE: 4 Students
SPECIFIC NEEDS TRAINING ADDRESSES: To provide the student with information and hands-on use of Hamar Laser's L-723 Triple Scan, the L-700 Spindle and the S-650 or S-640 Coupling alignment systems in a simulated machine build experience.
COURSE DESCRIPTION:

This course will provide theory explanation and hands on application in the following areas and gives the student an overview of which types of alignment practices should be used in the field:

  • Terminology
  • Laser system set-ups for flat, straight, level and squareness using the L-723 Triple Scan laser system.
  • Aligning drive systems with the Hamar Laser S-650 or S-640 Coupling system.
  • Aligning spindles to a master part with the Hamar Laser L-700 Spindle system.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Identify and describe equipment and functions.
  2. Correctly setup and use the L-723, L-700 and S-650 or S-640 systems.
  3. Provide the student an overview of complete alignment procedures and practices.
COST:

Machine Build/Foundation: $2,300 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.

 

Laser Alignment Overview

PREREQUISITE: None
CLASS LENGTH: 24 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: To provide the student with information and hands-on use of Hamar Laser's L-700, S-650, S-640 or L-720 series laser alignment systems.
COURSE DESCRIPTION:

This course will provide the student with an overview of how each system can be utilized to its fullest potential. It will also provide theory explanation and hands-on application in the following areas:

  • Applications for the L-720 Laser Alignment System
  • Applications for the L-700 Spindle Alignment System
  • Benefits of the S-650 and S-640 Shaft Alignment System
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Identify and describe equipment and functions.
  2. Identify applications and requirements needed.
  3. Perform basic alignment procedures.
COST:

Laser Alignment Overview: $1,250 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.


 

Laser System Calibration

PREREQUISITE: Basic Alignment Experience
CLASS LENGTH: 24 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: To provide the student with information to correctly qualify the L-700 Laser and to calibrate the A-517, T-266, T-261 and T-212 Targets using the A-807 calibration fixture.
COURSE DESCRIPTION:

This course will enable the student to properly setup, measure and calibrate A-517, T-266, T-261 and T-212 Targets using the A-807 calibration fixture and to ensure the laser system is being used is repeatable and accurate.
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Correctly setup each target in the A-807 calibration fixture.
  2. Correctly calibrate and save all calibration factors to disk or hard drive.
  3. Completely qualify the laser system to ensure it is working properly and accurately.
COST:

Laser System Calibration: $1,250 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.


 

Spindle Alignment Refresher

PREREQUISITE: Spindle Alignment, Level 1 - Basic
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: Students will be provided with information which was covered in the basic alignment course, as well as highlighting areas of interest generated from the class.
COURSE DESCRIPTION:

This course will provide theory explanation and hands-on training in the following areas:

  • Alignment Procedures
  • Alignment Applications
  • Explanation of pre-alignment and post-alignment considerations
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Correctly connect the target, interface and computer.
  2. Install a laser and a target in a machine.
  3. Measure a machine using Spindle8 Software.
COST:

Spindle Alignment Refresher Course: $1,050 per person
In-Plant Training: (Not Available)


Call 1-800-540-7754 for more information on this course.


 

Geometric Alignment Refresher

PREREQUISITE: Geometric Alignment, Level 3 -Flat, Level, Bore Alignment,
Straightness and Squareness
CLASS LENGTH: 16 Hours
CLASS SIZE: 6 Students
SPECIFIC NEEDS TRAINING ADDRESSES: Students will be provided with information to correctly setup and perform a 3 point buck-in, a 2 point buck-in, calibrate level vials, and create a square plane using a P-405 Optical Square or a L-722 or L-723 Laser.
COURSE DESCRIPTION:

This course will provide theory explanation and hands-on application in the following areas:

  • Calibrating level vials
  • Laser and target setups
  • Creating a flat plane
  • Creating a square plane using a P-405, L-722 or L-723
  • Calibration of targets to readout or computer software
PERFORMANCE OBJECTIVES:

Trainee will be able to:
  1. Identify and describe equipment and functions.
  2. Correctly set-up and perform 2 and 3 Point Buck-ins.
  3. Correctly calibrate level vials.
  4. Correctly setup and create square reference planes.
COST:

Geometric Alignment Refresher Course: $1,050 per person
In-Plant Training: (Not Available)




 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Copyright© 2003 Hamar Laser. Products covered under US & Foreign Patents. Site Index