COMMUNICATIONS HARDWARE

A-908 IR Reciever
A-910 Radio Transceiver/Hub (900 MHz and 2.4 GHz)
R-358/R-359 Computer Interface
T-251 Scanner Target Pre-Amplifier

A-908 IR Receiver

DESCRIPTION
The A-908 IR Receiver is the standard wireless data receiver used with all Hamar wireless targets. It uses a robust, infrared, frequency-modulated technology that does not interfere with radio-based communication systems. The receiver has a range of up to 100 feet (30.5 M), depending on the target used, and an acceptance range of +/- 85º. Power is provided by a replaceable, 9V battery.

APPLICATIONS

• Compatible with the following wireless targets/interfaces: S-650, A-1519,A-1519HR, A-1520 and R-359.

FEATURES

• Robust, frequency modulated infrared communication receiver.
• Will not interfere with radio-based devices.
• Works with all Hamar wireless targets.
• Range of up to 100 feet (30.5 M)depending on target.
• Has an acceptance range of +/- 85º.

SPECIFICATIONS

A-910 Transceiver/Hub

DESCRIPTION

Hamars Laser's A-1519/1520 Type II Universal Wireless Targets incorporate a built-in radio transceiver, avalable in 900 MHz or 2.4 GHz ISM band. Operating through the A-910 Radio Transceiver/Hub, up to 99 Type II Targets may be connected as a Target System Group, and up to ten Target Systems Groups consisting of 99 targets per group may be used at any one time. Power is supplied by a 3.5 volt lithium ion, rechargeable battery or by the computers's USB port. When connected to tyhe USB port, the battery charges automatically. For fewer than four targets, the A-910ZB is a very small, USB powerd 2.4 GHz radio tansceiver that can read up to four target simultaneously.

The 900 MHz model has an indoor range of 300 feet (91 meters) and the 2.4 GHz model has an indor range of 600 feet (183 meters). Data transmission is 4mW and 50mW respectively.

SPECIFICATIONS

R-358/R-359 Computer Interface

DESCRIPTION

The R-358 computer interface, one of our newest generation of interfaces, provides high accuracy (.00002" or 0.0005 mm resolution) for downloading live target data into a computer and compact size (it is 25% the size of the R-355D). It attaches to the computer with an RS-232 cable and is powered by a lithium ion battery for long life and usage and automatically turns on when the target starts taking measurements. An AC adapter/charger is provided, and the unit features "charging" and "power" LED indicators.

The wireless R-359 computer interface operates with a sophisticated frequency-modulated, IR transmitter and is used with our A-908 Wireless Receiver. It can take any standard 2 or 4-axis wired target and transmit its alignment data via an infrared wireless link. It is compatible with Hamar Laser's second generation of computer alignment software.

APPLICATIONS

• Coupling Alignment
• Spindle Alignment
• Machine Tool Geometry
• Turbine Alignment
• Bore and Extruder Alignment

FEATURES

• .00002" (0.5 micron) resolution.
• Powered by AC adapter or lithium ion battery.
• LED charging and power indicators.
• R-358 is compatible with all Hamar Laser's alignment software.
• Wireless R-359 operates with frequency-modulated IR transmitter and supports Hamar Laser's second generation of computer alignment software.
• Both interfaces can support two dual-axis, 2 two-axis targets (with optional splitter cable) or one 4-axis target.

SPECIFICATIONS

T-251 SCANNER TARGET PRE-AMPLIFIER

DESCRIPTION

The T-251 Scanner Target Pre-Amp is used with all Hamar continuously rotating lasers to allow the A-517 Single-Axis Scanning Target to communicate with a standard, two-axis readout or R-355 series interface. A switch on the side of the unit allows the user to select the readout or interface.

APPLICATIONS

• For use with all continuously rotating laser system applications. Works with the R-307, R-307V and R-355.

SPECIFICATIONS