T-1220 2-Axis Bore Target with See-Through Capability 20×20 mm PSD

T-1220 2-Axis Bore Target with See-Through Capability 20×20 mm PSD

Description

Large-bore, see-through target for long-distance bore applications such as stern tube and shaft bearing alignments on large ships. Has large measuring range with its 20×20 mm super-linear sensor. Up to 1 micron resolution and <1% measurement error. Prism flips out of the way to allow the laser to pass through to other targets without having to remove the target.

Applications

  • Stern tube bores
  • Long-distance applications where the L-708LD Laser is used
  • General alignment of large bores where a big misalignment is expected
  • Cam/Crankshaft/Cylinder Bore Alignment/Inspection
  • Turbine Bores

Features

  • Straightness checks on bores from 6 in. (152.4 mm) to 40 in. (1 m)
  • .0001 in. (0.001 mm) resolution and < 1% linearity when used with R-1307 Readout
  • PSD size of .79x.79 in. (20×20 mm)
  • PSD centered to measuring feet to within .0005 in. (0.012 mm)
  • Prism flips out of the way to allow the laser to pass through to other targets without having to remove the target.
  • Supports L-708LD Long-Distance laser as well as L-705/L-706 Bore Lasers and L-700 Spindle Laser.
  • Use the T-1225L Large-Bore 3-Leg Adapter for most applications from 4 in. (101.6 mm) to 40 in. (1 m)

Specifications

Weight
2.9 lbs. (1.3 kg)
Material
440C Stainless Steel
Resolution
.0001 in. (0.001 mm) when used with the R-1307 .00004 in. (0.0001 mm) when used with the Bore9 software or R-358 Computer Interface
Target Cell Error
<1% over the full measuring range
PSD Size and Type
.79x.79 in. (20 x 20 mm) 2-axis, see-through
Measuring Range 
(Standard Lasers)
±.295 in. (±7.5 mm) in both axes
Measuring Range 
(Long Distance Laser)
± 205 in. (± 5 mm) in both axes
Core Dimensions
Target to connector
10 feet (3.05 meters)
Target to connector
10 feet (3.05 m). Removable cable with Lemo connector
Connector
Lemo 9-pin metal - located on front and back of target
Mounting Dimension
3.9993 in. to 3.9998 in. (101.5 mm) outer diameter
PSD Concentricity
PSD concentric to mounting surface to within .0005 in. (0.0127 mm) TIR (electrical center to mechanical center)

Drawings