L-111 Laser Stand

L-111 Laser Stand

Descriptions

The L-111 Laser Stand is used to hold the L-700, L-705, L-706 and L-708 Lasers typically for high-accuracy bore alignment applications where it is desirable or required to mount the laser outside of the bores. It has coarse Pitch (vertical) and Yaw (horizontal) angular adjustments and is used to buck-in (make parallel to) the laser to 2 reference points. It also works with the L-102 Laser Beam Translator, which centers the laser in the first reference bore.

Applications

  • Compressor bearing bores
  • Engine blocks bores
  • Large caliber gun barrels
  • Stern tube bores

Features

  • Comes with 70 lb. magnetic base and 12” (300 mm) posts.
  • 8 inches (203 mm) of vertical travel.
  • Coarse Pitch (vertical) and Yaw (horizontal) angular adjustments.
  • Steel mounting block for L-705/L-706/L-708 lasers.

Specifications

  • 8 inches (203 mm) of vertical travel.
  • Coarse Pitch (vertical) and Yaw (horizontal) angular adjustments
  • +/- .36”/foot (30 mm/M) angular range
  • +/- .0006”/foot (0.05 mm/M) angular resolution
  • Steel mounting block for L-705/L-706 with 0.7498” mounting hole
  • Steel mounting block for L-708 with 1.2498” mounting hole

DIMENSIONS

Dimensions L-111 Laser Stand