THE LEADER IN
LASER BORE ALIGNMENT TECHNOLOGY

Bore Alignment Applications

Self-Centering Target Adapters
Reduces Alignment Time by 70%

Hamar Laser has been making bore alignment lasers for over 40 years. We know bore alignment. Our systems are known for their high accuracy, repeatability, innovative design and fast setup.

Our patented, self-centering, bore alignment targets are the easiest and fastest way to check bore alignment. This means no "bore sweeps" or no "0°-180° reversals" to correct alignment errors due to diameter changes. This reduces measurement points by at least 50%. It also reduces alignment times by 70% because it only takes about 5 seconds to take a measurement!

To measure the alignment, simply insert the bore target and self-centering adapter into the bore, let the weighted handle set the target in the bore and immediately the real-time alignment results are displayed on a simple 2-axis readout and then transmitted to our Bore9 Software. In most cases, you can achieve accuracies down to .0002 in. (0.005 mm) in 10 feet (3 m).

There are 6 bore alignment systems to choose from:

L-743 Geometric Measuring Capabilities
Features L-703B Self-Centering Bore Alignment System L-703B Twin-Barrel Extruder Alignment System L-705 Bore Alignment System L-706 Steam-Turbine Bore Alignment Laser System L-706 Small-Bore Alignment Laser System L-708 Internal Bore Laser Systems
ApplicationsEngine Blocks, Compressor Bores, Shaft Bearing BoresTwin-Barrel ExtrudersExtruder Barrels, Hinge-line Bore Alignments, Boring Bar Bearing AlignmentSteam and Gas Turbine Diaphragms & SealsArtillery Gun Barrel, Small-Bore ExtruderBoring Bar Bearing, Deep-Bore Straightness, Marine Propeller Shaft Bearing Bores Stern Tube Alignment
Speed15-Minute Setup Time 5 Seconds for Each Data Point20-Minute Setup Time10-Minute Setup Time25-Minute Setup Time15-Minute Setup Time15-Minute Setup Time
Easy to MountMounts to Face of Bore or On Instrument StandMounts to Spline Shaft with Customized FixtureDirect Mount into Gearbox Chuck Fixture or Externally in Laser StandMounts in Half-Bore X-Y FixtureDirect Mount into Gearbox Chuck Fixture or Externally in Laser StandMounting Directly into Bore with Self-Centering Fixture
Resolution of Measurement.00004 in. (0.001 mm).00004 in. (0.001 mm).00004 in. (0.001 mm).00004 in. (0.001 mm).00004 in. (0.001 mm).00004 in. (0.001 mm)
Operating Range50 ft. (15 m)50 ft. (15 m)100 ft. (30 m)110 feet (33 m)15 ft (4.5 m)200 ft (60 m)
Bore Diameter RangeØ1.18 -40 in. (Ø30-1,000 mm) Customized or AdjustableØ1.18 -40 in. (Ø30-1,000 mm) Customized OnlyØ1.18 -40 in. (Ø30-1,000 mm) Customized or AdjustableØ8-192 in. (Ø457-4,875 mm) AdjustableØ.75 - 6.0 in. (Ø19-150 mm) Customized OnlyØ3.75 -40 in. (Ø95-1,000 mm) Adjustable

Applications

L-703B Self-Centering Bore Alignment System
Engine Blocks, Compressor Bores, Shaft Bearing Bores
L-705 Bore Alignment System
Extruder Barrels, Hinge-line Bore Alignments, Boring Bar Bearing Alignment
L-706 Steam-Turbine Bore Alignment Laser System
Steam and Gas Turbine Diaphragms & Seals
L-706 Small-Bore Alignment Laser System
Artillery Gun Barrel, Small-Bore Extruder
L-708 Internal Bore Laser Systems
Boring Bar Bearing, Deep-Bore Straightness, Marine Propeller Shaft Bearing Bores Stern Tube Alignment

Easy to Mount

L-703B Self-Centering Bore Alignment System
Mounts to Face of Bore or On Instrument Stand
L-703B Twin-Barrel Extruder Alignment System
Mounts to Spline Shaft with Customized Fixture
L-705 Bore Alignment System
Direct Mount into Gearbox Chuck Fixture or Externally in Laser Stand
L-706 Small-Bore Alignment Laser System
Direct Mount into Gearbox Chuck Fixture or Externally in Laser Stand
L-708 Internal Bore Laser Systems
Mounting Directly into Bore with Self-Centering Fixture

Bore Diameter Range

L-703B Self-Centering Bore Alignment System
Ø1.18 -40 in. (Ø30-1,000 mm) Customized or Adjustable
L-703B Twin-Barrel Extruder Alignment System
Ø1.18 -40 in. (Ø30-1,000 mm) Customized Only
L-705 Bore Alignment System
Ø1.18 -40 in. (Ø30-1,000 mm) Customized or Adjustable
L-706 Steam-Turbine Bore Alignment Laser System
Ø8-192 in. (Ø457-4,875 mm) Adjustable
L-706 Small-Bore Alignment Laser System
Ø.75 - 6.0 in. (Ø19-150 mm) Customized Only
L-708 Internal Bore Laser Systems
Ø3.75 -40 in. (Ø95-1,000 mm) Adjustable
50%

Reduced Alignment Downtime

Faster alignment checks with reduced setups and real-time alignment data.

1.0µm

Ultra-Accurate Measurements

Resolution to 1.0 microns. Accuracy up to 0.0013 mm/m.

55+

Years of Experience

We know what works…and
what doesn’t. Try us and see!

What Makes Hamar Better?

Hamarlaser Ultra-Accuracy

Engineered for Accuracy

Like all of our lasers, our bore alignment lasers are designed to offer the highest alignment accuracy possible. Excellent repeatability is a hallmark of our self-centering technology.

High-Speed Alignments

High-Speed Alignments

Renowned for their ease of use and fast setups, our systems significantly speed up alignments with real-time data feedback and simultaneous multi-axis adjustment.

Versatility

Versatility

With 16 different laser alignment products, we have a laser to fit virtually any alignment application for checking concentricity, flatness, straightness, squareness, parallelism, rotation axis collinearity and spindle tramming.

Alignment Experience

Alignment Experience

More than 5 decades of alignment experience goes into every product, along with our 28 patents! We know laser alignment!

Innovation

Innovation

We design innovative laser systems engineered for specific applications, not inferior and under-performing “one-size-fits-all” products.

Service

Service

Family owned and operated, we make and service our lasers right here in the USA, providing our customers with a high level of personal service.