|
|
|
|
WHAT'S NEW @ HAMAR LASER S-670 3-Axis Wireless Shaft Alignment System
The S-670 is a next-generation shaft alignment laser system and part of the new Stealth Series developed by Hamar Laser and distributed by Hyatt Industries.
S-680 5-Axis Wireless Shaft Alignment System
The S-680 is a next-generation shaft alignment laser system and part of the new Stealth Series developed by Hamar Laser and distributed by Hyatt Industries.
R-1307 Readout
R-1307C: Reads all Hamar Laser Single and Dual Axis Cabled Targets (e.g. A-517, T-214,T-218, etx). Functional Replacement for the R-307 Readout.
R-1308 Auxiliary Readout
The A-1531, A-1532 and
A-1533 Extended Range Universal Targets operate with most sweeping lasers
from other manufacturers and with all Hamar scanning lasers.This line
of affordable targets is suitable for most alignment tasks. They have
a measuring range of up to 3", resolution as fine as .001", multiple
display modes and measurement units... A-1519/1520 Single-Axis Wireless Target The A-1519, A-1519HR and A-1520 operate with all Hamar
sweeping lasers and feature wireless communication, a measuring range
of up to 1", resolutions of.0005" (A-1519), .0001" (A-1519)
and .00002" (A-1520), an electronic zero function and an operating
range of up to 100'. R-358 Computer Interface
Our newest readout, the R-1309 was designed for the
A-1519 and A-1520 wireless targets, to display up to four targets simultaneously.
Its READ9 software includes several basic alignment routines to ease setup
and enhance its use. L-730 Series Precision Geometry Lasers
L-740 Series Ultra-Precision Geometry Lasers
|
|
Available in the different models:
Readout for the A-1519 and the A-1520 Type II Unitargets. Plugs into the AUX port located on the side of the Target. Displays the Target Position in Inches or Millimeters, in Relative(Zero) or Absolute mode. Bright Numerical LED Display with a resolution of four decimal places (i.e. 0.0001)
The
R-358 is the communication link between the target and our alignment software.
It can be used with any Hamar straight-line laser system, old or new.
The R-358 is a compact (1/4 the size of the R-355D), lightweight device,
which offers sub-micron resolution and is also available in a wireless
version (Model R-359).
50%
lower price, the L-730 Series Geometry Lasers offer the ultimate in affordability
and versatility. 1, 2 or 3 plane lasers for aligning machining centers,
rolls, fabrications and many more. All mid-accuracy lasers feature our
continuously rotating laser plane technology and a surprisingly simple
and fast squareness capability.
30%
lower price with highest geometry accuracy available, the L-740 Series
Geometry Lasers offer increadibly fast and accurate alignments of machining
centers, presses, film lines, paper mills, surface platesand many more.
1, 2 or 3 laser planes that all feature our continuously rotating laser
plane technology and a surprisingly simple and fast squareness capability.