The L-723 Triple Scan Laser System is the only laser in the world to offer 3 automatically rotating laser planes that are accurate enough for today's ever-increasing tolerances. This creates a powerful tool to not only MEASURE but also FIX problems in a fraction of the time needed with conventional methods.

The L-723 laser planes are flat to ½ an arc second and square to 1 arc second. The laser comes with a pitch, roll and yaw adjustment base that features 1 arc-second, split-prism level vials and a powerful magnet for maximum stability.

The L-723 Triple Scan Laser allows you to check the entire machine with one set-up, before you begin an alignment. This quick analysis, where every part of the machine is checked to the same coordinate system, assures that all alignment problems are quickly identified.

Designed to quickly measure and correct machine geometry with minimal setup, the L-723 can effortlessly:

• Measure flatness and straightness of bed ways or columns, and squareness and parallelism between axes, all with one setup
• Simultaneously measure parallelism in 2 axes between a master and slave way on a gantry
• Measure parallelism between rolls
• Collect data and analyze lines of motion using our Machine Tool Geometry or Plane5 Software

After the misalignment data has been collected and analyzed, you can use the L-723 to FIX the errors (without changing the setup) by using our wireless targets as digital indicators.

Applications include: Machining centers (HBMs, VBMs, HMCs, VMCs, Gantries and VTL's), automotive wing-bases, aircraft assembly, presses, injection molding machines, paper, printing and film line roll alignments, grinders (surface), saw mills and metal fabrications.